Let the stain dry 6 to 8 hours between coats.CLEAR FINISH APPLICATION:Be sure to apply a clear protective finish such as Minwax® Fast-Drying Polyurethane for interior use or Minwax® Helmsman® Spar Urethane for exterior applications.Before applying a clear finish, test the stain for dryness by wiping a small hidden area with a rag moistened with mineral spirits. Areas of heavier coats should be evened out before moving to a new section.Allow stain to dry approximately 6 to 8 hours.To darken the color, apply additional coats by following the instructions above. Always make final brush strokes in the direction of the embossed grain. Recommended finishes include Minwax® Fast-Drying Polyurethane or Water Based Oil Modified Polyurethane or Helmsman® Spar Urethane for exterior use.FIBERGLASS DOOR PROJECTS: STAIN APPLICATION:Using a high quality natural bristle brush, spread a thin, even coat over the entire surface, starting with the raised panel sections. CLEAR FINISH APPLICATION:After 24 hours (dry time may be extended due to heavy application, low temperatures or high humidity), complete your project by applying a clear protective finish.
0 Comments
Leave a Reply. |